आपको मान्य व्यावसायिक घंटों वाली तालिका की आवश्यकता है, जिसमें सप्ताहांत और छुट्टियों को शामिल नहीं किया गया है (या सप्ताहांत/छुट्टी के रूप में चिह्नित किया गया है ताकि आप उन्हें छोड़ सकें।) प्रत्येक पंक्ति एक दिन और उस दिन के काम के घंटों की संख्या का प्रतिनिधित्व करती है। फिर आप अपनी आरंभ तिथि से पहली (न्यूनतम) तिथि तक व्यावसायिक घंटे की तालिका को क्वेरी करते हैं, जहां चिह्नित सप्ताहांत/अवकाश पंक्तियों को छोड़कर योग (घंटे*60) आपके मिनट पैरामीटर से अधिक है। इससे आपको आपकी समाप्ति तिथि मिल जाती है।
ये रही दिन तालिका:
CREATE TABLE [dbo].[tblDay](
[dt] [datetime] NOT NULL,
[dayOfWk] [int] NULL,
[dayOfWkInMo] [int] NULL,
[isWeekend] [bit] NOT NULL,
[holidayID] [int] NULL,
[workingDayCount] [int] NULL,
CONSTRAINT [PK_tblDay] PRIMARY KEY CLUSTERED
(
[dt] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
यहां बताया गया है कि मैं दिनों के साथ तालिका कैसे भरता हूं:
CREATE PROCEDURE [dbo].[usp_tblDay]
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@Dt datetime ,
@wkInMo int,
@firstDwOfMo int,
@holID int,
@workDayCount int,
@weekday int,
@month int,
@day int,
@isWkEnd bit
set @workDayCount = 0
SET @Dt = CONVERT( datetime, '2008-01-01' )
while @dt < '2020-01-01'
begin
delete from tblDay where dt = @dt
set @weekday = datepart( weekday, @Dt )
set @month = datepart(month,@dt)
set @day = datepart(day,@dt)
if @day = 1 -- 1st of mo
begin
set @wkInMo = 1
set @firstDwOfMo = @weekday
end
if ((@weekday = 7) or (@weekday = 1))
set @isWkEnd = 1
else
set @isWkEnd = 0
if @isWkEnd = 0 and (@month = 1 and @day = 1)
set @holID=1 -- new years on workday
else if @weekday= 6 and (@month = 12 and @day = 31)
set @holID=1 -- holiday on sat, change to fri
else if @weekday= 2 and (@month = 1 and @day = 2)
set @holID=1 -- holiday on sun, change to mon
else if @wkInMo = 3 and @weekday= 2 and @month = 1
set @holID = 2 -- mlk
else if @wkInMo = 3 and @weekday= 2 and @month = 2
set @holID = 3 -- President’s
else if @wkInMo = 4 and @weekday= 2 and @month = 5 and datepart(month,@dt+7) = 6
set @holID = 4 -- memorial on 4th mon, no 5th
else if @wkInMo = 5 and @weekday= 2 and @month = 5
set @holID = 4 -- memorial on 5th mon
else if @isWkEnd = 0 and (@month = 7 and @day = 4)
set @holID=5 -- July 4 on workday
else if @weekday= 6 and (@month = 7 and @day = 3)
set @holID=5 -- holiday on sat, change to fri
else if @weekday= 2 and (@month = 7 and @day = 5)
set @holID=5 -- holiday on sun, change to mon
else if @wkInMo = 1 and @weekday= 2 and @month = 9
set @holID = 6 -- Labor
else if @isWkEnd = 0 and (@month = 11 and @day = 11)
set @holID=7 -- Vets day on workday
else if @weekday= 6 and (@month = 11 and @day = 10)
set @holID=7 -- holiday on sat, change to fri
else if @weekday= 2 and (@month = 11 and @day = 12)
set @holID=7 -- holiday on sun, change to mon
else if @wkInMo = 4 and @weekday= 5 and @month = 11
set @holID = 8 -- thx
else if @holID = 8
set @holID = 9 -- dy after thx
else if @isWkEnd = 0 and (@month = 12 and @day = 25)
set @holID=10 -- xmas day on workday
else if @weekday= 6 and (@month = 12 and @day = 24)
set @holID=10 -- holiday on sat, change to fri
else if @weekday= 2 and (@month = 12 and @day = 26)
set @holID=10 -- holiday on sun, change to mon
else
set @holID = null
insert into tblDay select @dt,@weekday,@wkInMo,@isWkEnd,@holID,@workDayCount
if @isWkEnd=0 and @holID is null
set @workDayCount = @workDayCount + 1
set @dt = @dt + 1
if datepart( weekday, @Dt ) = @firstDwOfMo
set @wkInMo = @wkInMo + 1
end
END
मेरे पास एक हॉलिडे टेबल भी है, लेकिन सभी की छुट्टियाँ अलग हैं:
holidayID holiday rule description
1 New Year's Day Jan. 1
2 Martin Luther King Day third Mon. in Jan.
3 Presidents' Day third Mon. in Feb.
4 Memorial Day last Mon. in May
5 Independence Day 4-Jul
6 Labor Day first Mon. in Sept
7 Veterans' Day Nov. 11
8 Thanksgiving fourth Thurs. in Nov.
9 Fri after Thanksgiving Friday after Thanksgiving
10 Christmas Day Dec. 25
एचटीएच